Dream Big with Focusrite - Win a dream recording weekend at Air Studios. Click here to enter

Saffire PRO 14

Saffire PRO 14 Header Image

Articles

There are an increasing number of PC laptops appearing on the market with Thunderbolt™ ports and no Firewire port. Any PC users with a Thunderbolt™ port only will require the Apple Thunderbolt™ to...
If you are having trouble with installing Plug Ins on a Mac please see this video . To get your Scarlett Plug Ins (or any other Focusrite or Novation Plug Ins) installed properly on your Windows...
Many new users become confused when they start recording and find that their Vocal or other signal from one microphone is placed only on the left in their headphones or speakers. The common question...
The following video guides you through how to set up your Saffire interface for recording and playback in Cubase:
Line inputs on Focusrite interfaces, both standard and combi, go through a small section of the preamp circuit. Due to the transparent nature of our preamps, however, this does not colour the signal...
The Saffire and Scarlett microphone preamps provide between +10dB and +55dB of gain to the input signal before the converters. The gain required to obtain an acceptable signal level will depend on...
This is because the interface's direct monitoring is enabled. This is the signal that goes direct from the interface's mic, line or inst input to the output without going through the computer so that...
Many of our interfaces come with an added feature called Standalone Mode. This enables the user to set these units up to work as an ADAT connected unit, similar to one of our Octopre MkIIs or any...
The Saffire Line is capable of Dual Unit Mode in which two Saffire are connected via Firewire. In this mode the two Interfaces become one interface. You will not need to create any aggregate devices...
If the locked (LKD on smaller interfaces) light on the front of your interface is off and it won't pass audio then the "Sync source" in Saffire/Scarlett MixControl is likely incorrectly set to a...
In the routing section of Saffire and Scarlett Mix control the term "Daw" in the drop down menu's refers to the outputs of the recording software that you are using. Normally by default a piece of...
The Saffire Pro 14, Pro 24, and Pro 24 DSP use the Focusrite PSU-05 (12V DC, 1250 mA, center pin positive). If you need a replacement, contact your local distributor (as found here ) about ordering.
This video will guide you through the necessary steps to record audio from one application to another using the loopback feature of your Pro 14:
For any problem you may be experiencing, please ensure that you have the latest software for the Pro 14 from here . If this doesn't help, see the steps below: I am having connection or performance...
Microphone inputs 2k Ohms Line inputs >10k Ohms Instrument inputs 10M Ohms
There is a three part tutorial on how to use Saffire MixControl available on our answerbase. They can be found by clicking on the following links: Saffire MixControl Tutorial Part I: Creating Mixes...