Dream Big with Focusrite - Win a dream recording weekend at Air Studios. Click here to enter

Saffire PRO 40

Saffire PRO 40 Header Image

Articles

Previously computers or cards with Firewire 400 ports, which are featured on the Saffire Line of Interfaces, were common. Today most of the computers on the market that do feature Firewire have a...
There are an increasing number of PC laptops appearing on the market with Thunderbolt™ ports and no Firewire port. Any PC users with a Thunderbolt™ port only will require the Apple Thunderbolt™ to...
If you are having trouble with installing Plug Ins on a Mac please see this video . To get your Scarlett Plug Ins (or any other Focusrite or Novation Plug Ins) installed properly on your Windows...
Many new users become confused when they start recording and find that their Vocal or other signal from one microphone is placed only on the left in their headphones or speakers. The common question...
The following video guides you through how to set up your Saffire interface for recording and playback in Cubase:
If you are seeing the following error message when trying to register your product, it may be possible that you have entered the 18 digit bundle-code instead. Please see the following short video for...
Line inputs on Focusrite interfaces, both standard and combi, go through a small section of the preamp circuit. Due to the transparent nature of our preamps, however, this does not colour the signal...
The Saffire and Scarlett microphone preamps provide between +10dB and +55dB of gain to the input signal before the converters. The gain required to obtain an acceptable signal level will depend on...
This is because the interface's direct monitoring is enabled. This is the signal that goes direct from the interface's mic, line or inst input to the output without going through the computer so that...
Many of our interfaces come with an added feature called Standalone Mode. This enables the user to set these units up to work as an ADAT connected unit, similar to one of our Octopre MkIIs or any...
The Saffire Line is capable of Dual Unit Mode in which two Saffire are connected via Firewire. In this mode the two Interfaces become one interface. You will not need to create any aggregate devices...
If the locked (LKD on smaller interfaces) light on the front of your interface is off and it won't pass audio then the "Sync source" in Saffire/Scarlett MixControl is likely incorrectly set to a...
In the routing section of Saffire and Scarlett Mix control the term "Daw" in the drop down menu's refers to the outputs of the recording software that you are using. Normally by default a piece of...
When running at the higher sample rates of 88.2kHz or 96kHz on the Saffire Pro 40, you will lose some ADAT channels. This is standard place when using ADAT, as ADAT only supports the full eight...