Scarlett 2i4

Scarlett 2i4 Header

Articles

Video guide to getting started with your Scarlett 2i4 on Mac
Video guide to getting started with your Scarlett 2i4 on PC
The Focusrite USB 2.0 driver for the Scarlett 2i2 and Scarlett 2i4 should work fine on Windows XP however this operating system is no longer in our test procedure, therefore it is not officially...
Previous issues with Pro Tools 11 and "Dynamic Plug-in Processing" have been resolved in updates to Pro Tools. Please make sure you have the latest version of Pro Tools 11 if this check box still...
Direct monitoring allows a user to listen to the input signal of the interface with near zero latency. It takes the input signal on the interface and sends it straight to the headphone and line...
Line inputs on Focusrite interfaces, both standard and combi, go through a small section of the preamp circuit. Due to the transparent nature of our preamps, however, this does not colour the signal...
The Saffire and Scarlett microphone preamps provide between +10dB and +55dB of gain to the input signal before the converters. The gain required to obtain an acceptable signal level will depend on...
If you are seeing the following error message when trying to register your product, it may be possible that you have entered the 18 digit bundle-code instead. Please see the following short video for...
This is because the interface's direct monitoring is enabled. This is the signal that goes direct from the interface's mic, line or inst input to the output without going through the computer so that...
Many new users become confused when they start recording and find that their Vocal or other signal from one microphone is placed only on the left in their headphones or speakers. The common question...
If you are having trouble with installing Plug Ins on a Mac please see this video . To get your Scarlett Plug Ins (or any other Focusrite or Novation Plug Ins) installed properly on your Windows...
Some users have reported experiencing audio glitches and drop outs with the Scarlett range of interfaces since updating to OS X 10.9 Mavericks. If you are experiencing these problems with your...
Many of our Setup Guides show you the preference menu of your DAW Software with a drop down menu that features the interface's name, Scarlett, Saffire, Forte, etc. On Mac the DAW will read the name...
This article addresses concerns raised by some about 16 bit and 24 bit in Windows systems. When using the WDM driver, only 16 bit modes are seen as an option in the Advanced section of the interface'...
Setting up the Scarlett 2i4 for recording in Logic and recording/DJing in Ableton Live.
As the 2i4 only has two inputs and 4 outputs, Scarlett MixControl is not necessary for its use; so is not compatible with it. You will need to do all routing in your chosen DAW and if you would like...
The 2i4 is a great tool for the laptop DJ. Its two phono outputs make connection to a mixer very easy, and the ability to switch the headphone feed source between outputs 1/2 or outputs 3/4 mean that...